Your concrete should be poured as a monolithic slab. It should be a 4 inch thick slab with a 12 inch wide by 12 inch deep footer around the perimeter. The slab size will be the size of your building plus a 3&1/2 inch skirt around the perimeter that is 1&1/2 inches lower than the main slab. This adds strength because your building is not sitting on the outside edge of the slab. At the same time, the skirt being 1&1/2 inches lower, sheds any water away from the interior of your building.
EXAMPLE. A 30'x40' building will have an overall size of 30'7'' x 40'7" and the part of the slab that is 1&1/2 inches taller will be 30'x40' See example pictures.
Note. These are minimum requirements. Check your local codes for your area.
Delivery time varies on your location. For further specific information, give our office a call.
Width X Length X Height.
ALL of our custom metal buildings price includes set up and delivery.
Our metal buildings can be completely 100% customized, the max width is 78' and max leg height is 14'.
Certified buildings are engineered to meet a required & specific snow and/or wind load.
Visa, Mastercard, American Express, Discover, money order, debit, personal check or business check.
A down payment of 17% is made to the product representative to get your order started. Buildings under $15,000 balance is due after install of building. Over $15,000 half is due at time of scheduling and the other half after building is installed.
Remove anything out of the way that would impede the progress of the installation. Clearly mark the four corners of the building location and level the site if it is unlevel. Three foot clearance is required around the whole building site between other objects.
We have three types of anchors: 32” rebar anchors - for ground/asphalt installation. Double helix mobile home anchors - for ground/asphalt installations that are certified. Wedge anchors - for concrete installations.
To insure proper installation, your site must be level within 3" from corner to corner.
We offer three roof styles: Regular Style units have rounded corners and are considered the “basic” of carport designs. Boxed Eave units are designed with an “A” frame roof truss and horizontal roof panels. Vertical Roof units are designed with an “A” frame roof truss and vertical roof panels.
Yes, units are available for drop-off only. All materials will be delivered to your location. No assembly instructions are provided. We highly recommend that you have your unit installed by the professional contactors.